Leather repair set black especially for leather & artificial leather.

The leather color black is the optimal solution for concealing abrasions, fading and light scratches on leather or artificial leather. With the black liquid leather, cracks, holes or deep scratches can be permanently closed. This type of leather repair restores the leather to its original leather color. All of our products are developed and manufactured in Germany. The high and consistent quality of our products has been the goal of our work for over 20 years. Quality is trust and trust is our trademark. We earn this trust from our customers every day.

Leather color black & liquid leather black

If there are scratches, abrasions or slight fading, the original color of the leather will be refreshed with our black leather dye. You can fill deep scratches, erasers, etc. with our black liquid leather.

Item description:

Contents:

• 30ml leather paint
• 10ml liquid leather black
• 1 sanding pad
• 1 plastic spatula
• 1 sponge

Basically, the leather should be cleaned with our leather cleaner and degreased with leather degreaser before the color is refreshed. If there are scratches, abrasions or slight fading, the original color of the leather will be refreshed with our leather dye. Deep scratches, cracks, etc. can be filled with our liquid leather. After dyeing the leather with the leather dye, we recommend sealing and caring for the leather. The sealing protects against renewed wear and care stops the leather from deteriorating and protects against fading.

Our leather dye has been developed for the recoloring of fading and abrasions on smooth leather. You can often find this damage in the entry area of ​​cars and on leather steering wheels and on the front edges of furniture and in the armrest area.

Our leather dye refreshes the original color. It is opaque and abrasion-resistant.

We recommend using a spray gun for recoloring.

Always check all products first in a hidden area for changes or correctness of color!

Application:

1. Leather sanding pad

Smooth rough spots, hard and protruding edges and dry cracks with the sanding pad. Remove sanding dust.

2. Liquid leather

Open the tube and fill the damaged areas with the liquid leather. Distribute the liquid leather evenly with a spatula. Then let it dry for 1 - 2 hours depending on the filling quantity. Repeat the process until the repair area is as smooth and filled as possible.

In the case of larger damage, it is sometimes not possible to get the surface of the repair nice and even and smooth just by filling it. Such damaged areas then have to be reworked. However, liquid leather cannot be sanded dry. This would damage the repair area.

In cases where smoothing of the repair area is required, this can be done with solvent, acetone, nail polish remover. The solvent dissolves the top layer of the repair compound so that the surface can be easily reworked. You can use a latex glove by lightly wetting your index finger and using it to slightly smooth the repair area. Alternatively, the repair area can also be refinished with the sanding pad. Both methods are used to smooth a repair. Always work carefully and with little solvent. If you work too wet, the repair area will “blur.” In this way, you can recreate a repair until you are satisfied with the result.

Liquid leather repairs must finally be color-matched with the leather dye to compensate for differences in color and shine. In order to adequately cover the liquid leather, the leather dye should be applied several times and dried with a hairdryer in between. Then seal and care for the leather a day later

3. Leather color

Apply the leather dye evenly to the affected areas from seam to seam using a sponge or paint gun and dry with a hairdryer. For small areas, applying to the affected area is sufficient. Only treat areas with color changes. If high coverage is required, apply the tint in several layers and dry with a hairdryer in between.