Leather color

STEP 4

VILOU Leather Dye – For re-dyeing fading and abrasions on leather and artificial leather

Typical signs of wear on leather can be optimally cleaned, repaired, colored and cared for with VILOU products . Dyed leather wears out due to stress, aging and especially due to a lack of leather care. In order to eliminate color defects, we have developed the VILOU leather dye . The original color of the leather is restored by using VILOU leather dye . The VILOU leather dye is characterized by the highest abrasion resistance for leather dyeing and leather repairs. We produce almost all colors used by automobile manufacturers and the furniture industry .

If you cannot find your color in our database, we will produce your color individually based on a sample. The sample material should be sent to Ledertechnik Berlin Manufacturing UG with dimensions of at least 2x2cm.

Before dyeing leather, the leather should be thoroughly cleaned with the VILOU leather cleaner . Old grease must then be removed with the VILOU leather degreaser , as this is the only way to ensure proper adhesion of the VILOU leather paint . Rough areas and protruding edges should be smoothed with the VOLOU sanding pad . Between the individual layers of paint, the leather can be sanded again with the VILOU sanding pad or VILOU polishing pad to achieve a particularly beautiful result.

APPLICATION:

Shake the VILOU leather paint for at least 15 seconds before use until you can hear the color mixing aid inside. Apply the VILOU leather dye evenly to the affected dyeing area from seam to seam using the included VILOU sponge and always dry with a hairdryer at medium temperature. If greater coverage is desired, apply the VILOU leather paint thinly in several layers and always dry with a hairdryer in between.

NOTE: Overaging and fading due to UV exposure can cause the leather to differ from the original color. Partial recoloring may result in color differences, as the VILOU leather color always corresponds to the original color of the leather. In these special cases, the entire leather surface should be recolored with VILOU leather dye .

In order to be able to optimally remove the damaged areas depending on their size, we have put together the VILOU Leather Dye Set S , the VILOU Leather Dye Set M and the VILOU Leather Dye Set L

All VILOU products are based on decades of experience and development. VILOU products are at the highest level and are perfectly coordinated with each other through constant laboratory tests for leather care and leather repairs. In addition, ALL VILOU products are made in Germany.

Check all products in advance in a hidden area for changes and correctness of color!

Not suitable for Alcantara, suede and aniline leather!