Leather sealant – abrasion protection for car & furniture
Original Leather Technology – VILOU – Made in Germany since 1999
Development and manufacture of professional leather care and leather repair systems in Germany
VILOU Leather Sealant – Abrasion Protection for Cars and Furniture
Protects pigmented smooth leather from abrasion, soiling and color transfer from clothing.
✓ Protects against wear and tear caused by use
✓ Reduces jeans color transfer on light leather
✓ Ideal for car seats, steering wheels and leather furniture
✓ Recommended after leather dyeing
✓ Thin application – no need to polish afterwards
✓ Designed and manufactured in Germany
Effectively protect leather from daily wear and tear
Car seats, seat bolsters, leather steering wheels, leather sofas, and other contact surfaces are subjected to daily wear and tear from friction and movement. This can cause the protective layer of the leather to gradually wear away. The consequences are often... Color abrasion, soiling, signs of wear or discoloration caused by clothing.
The VILOU Leather Sealant It forms a thin protective layer on surface-dyed smooth leather. This reduces direct stress on the color layer and makes it more difficult for textile dyes to adhere – for example, from dark jeans onto light car seats or leather furniture.
The sealant is suitable both for preventive protection of new leather surfaces and for final treatment after leather dyeing or leather repair.
Leather sealant primarily serves to protect against abrasion, wear, and color transfer. Traditional leather care, on the other hand, mainly aims to keep older leather supple. For new, dyed, or heavily used smooth leather, surface protection is the primary focus.
Highly recommended for
- Driver's seats and heavily used seat bolsters
- Light-colored car seats pose a risk of jeans color transfer.
- Leather steering wheels, gear knobs and hand grips
- Door panels, armrests and center consoles
- Leather sofas, leather armchairs and leather chairs
- Boat, yacht and motorhome leather
- Freshly dyed or refreshed leather surfaces
How much do I need?
| Size | Recommended use |
|---|---|
| 150 ml | At least sufficient for the protective treatment of an entire vehicle interior. |
| 250 ml | For larger applications, multiple treatments, or extensive leather furniture |
| 1,000 ml | For commercial users, vehicle detailers and various interior fittings |
The actual coverage depends on the type of leather, absorbency, surface area and application quantity.
How to properly apply VILOU leather sealant
1. Clean the leather thoroughly
Completely remove dirt and any existing care product residue. Then allow the surface to dry thoroughly.A sealant should only be applied to clean and dry leather.
2. Shake the bottle well.
Shake the VILOU leather sealant thoroughly before use.
3. Apply sparingly
Apply a small amount to the supplied non-woven cloth. Then spread it thinly and evenly over the leather, from seam to seam.
4. Let it dry
Allow the treated surface to dry completely. Do not polish or use while drying.
5. Renew protection regularly
Heavily stressed contact surfaces should be checked approximately every three months and treated again if necessary. For surfaces subject to normal wear, a longer interval may be sufficient.
Allow the leather dye to dry completely, then apply a thin coat of sealant. This provides the renewed color layer with additional protection against friction and wear and tear.
For which types of leather is the sealant suitable?
Suitable for pigmented, surface-dyed smooth leather. This type of leather is used in most car seats, steering wheels, and many modern leather furniture pieces.
A simple test: If a rubbed-in drop of water remains on the surface without immediately soaking into the leather, it is often surface-dyed smooth leather. Nevertheless, the product should always be tested on an inconspicuous area first.
Alcantara, nubuck, suede, nubuck, and open-pore aniline leather. For synthetic leather and vinyl, first test the material compatibility on an inconspicuous area.
Frequently asked questions about leather sealing
Does the sealant protect against dye transfer from jeans?
The sealant reduces the adhesion and penetration of textile dyes and facilitates regular cleaning. However, due to the variety of textiles and usage conditions, no care product can guarantee complete protection against all color transfer.
Can I use this to seal car leather?
Yes. The sealant is particularly suitable for pigmented car seats, seat bolsters, leather steering wheels, armrests, door panels and other heavily used smooth leather surfaces.
Does the sealant change the leather color?
With correct, thin application, the existing leather look should be preserved. Since leather surfaces can react differently, a preliminary test on an inconspicuous area is necessary.
Does the surface need to be polished?
No. The VILOU leather sealant is applied thinly and evenly and then left to dry without buffing.
How often should leather be sealed?
Heavily used areas should be checked approximately every three months and treated again if necessary. Longer maintenance intervals are possible for areas with light use.
Important usage instructions
- Test on an inconspicuous area before each use.
- Apply only to clean and completely dry leather.
- Apply thinly and evenly – do not overdose.
- Do not polish.
- Protect from frost and excessive heat.
- Observe the care and safety instructions on the product.
Available for private and commercial applications
Original Leather Technology – Made in Germany since 1999
Professional systems for leather care, leather dyeing and leather repair – developed and manufactured in Germany.