Leather repair set "M"

🛠️ Leather repair with degreaser, liquid leather, dye & sealing

This guide shows you step by step how to Cleaning, repairing, dyeing and protecting leather surfaces can – ideal for smooth leather on cars, furniture, jackets or shoes.

---

1️⃣ Leather degreaser – surface preparation

• A clean cloth lightly with Leather degreaser moisten.
• Wipe away greasy areas carefully – especially on open-pored leathers such as suede or aniline, only go over them briefly to avoid stains.
• Some grease stains cannot be completely removed, but the adhesion of subsequent products is improved.
• A notice: After cleaning, the leather must be treated with Leather sealing will be protected anew.

---

2️⃣ Liquid leather – filling damaged areas & model

• Open the tube and liquid leather Pour into the damaged area.
• Spread evenly with a spatula and allow to dry for 1-2 hours depending on the amount of fill.
• Repeat the process until the surface is smooth and completely filled.

Important: For larger areas of damage, a smooth surface cannot be achieved simply by applying filler.

There Liquid leather not sanded dry Two smoothing methods are available for the purpose of achieving this:

• Solvent method: Apply some acetone or nail polish remover to a latex glove and gently wipe the area with your finger.
• Sanding pad method: Once completely dry, carefully smooth with the sanding pad.

Always use solvents sparingly – too much can damage the repair. The area can be reshaped several times until the result is satisfactory.

Color matching: After drying, the repair area must be treated with Leather color They can be adjusted to compensate for differences in color and gloss.

Apply several thin coats, drying with a hairdryer in between. Afterwards, be sure to seal and condition.

---

3️⃣ Leather color – color matching & Surface finishing

• Leather color Apply from seam to seam using a sponge or paint gun.
• Small areas can be targeted with a dabbing motion.
• Dry with a hairdryer in between.
• Apply several thin coats for optimal coverage if needed.

Only treat the areas that have actually changed color – this way the leather look remains natural and authentic.

---

4️⃣ Leather sealant – protection against abrasion & pollution

• Leather sealing Apply thinly with a soft cloth.
• Allow to dry completely without polishing.
• For ongoing maintenance of heavily used areas, repeat every 3 months.