30ml BMW Leather Repair Set "M"

BMW leather color / leather repair kit especially for BMW leather & artificial leather.

The BMW leather paint is the optimal solution for concealing abrasions, fading and light scratches on leather or artificial leather. This type of leather repair restores the leather to its original BMW leather color. Our BMW leather paint is characterized by the highest abrasion resistance for leather repairs. The liquid leather can be used to permanently close cracks, holes or deep scratches. The liquid leather is flexible after drying.

All of our products are developed and manufactured in Germany. The high and consistent quality of our products has been the goal of our work for over 20 years. Quality is trust and trust is our trademark. We earn this trust from our customers every day.

Contents:

• 30ml leather degreaser
• 30ml BMW leather paint
• 30ml leather sealant
• 10ml liquid leather neutral / colorless
• 1 sanding pad
• 1 plastic spatula
• 1 sponge
• 2 fleece cloths

Basically, the leather should be cleaned with our leather cleaner and thoroughly degreased with leather degreaser before the color is refreshed. In the event of scratches, abrasions and slight fading, the original BMW leather color of the leather will be refreshed with our leather color. Deep scratches, cracks, etc. can be permanently closed with our liquid leather. The liquid leather repair is flexible after drying. After dyeing the leather with the leather dye, we recommend sealing and caring for the leather. The sealing protects against renewed wear and abrasion and the care stops the leather from deteriorating and protects against fading.

Our leather dye refreshes the original color. It is opaque and abrasion-resistant.

We recommend using a spray gun for recoloring.

Always check all products first in a hidden area for changes or correctness of color!

Application:

1. Leather degreaser

Lightly moisten a clean cloth with the leather remover and go over the greasy areas. Especially with open leather (suede leather, aniline leather, etc.) you should only briefly go over the leather with a cloth to avoid edges and stains. Not all areas of fat can be completely removed. After cleaning with leather degreaser, the leather must be re-protected with leather sealant.

2. Liquid leather

Open the tube and fill the damaged areas with the liquid leather. Distribute the liquid leather evenly with a spatula. Then let it dry for 1 - 2 hours depending on the filling quantity. Repeat the process until the repair area is as smooth and filled as possible.

In the case of larger damage, it is sometimes not possible to get the surface of the repair nice and even and smooth just by filling it. Such damaged areas then have to be reworked. However, liquid leather cannot be sanded dry. This would damage the repair area.

In cases where smoothing of the repair area is required, this can be done with solvent, acetone, nail polish remover. The solvent dissolves the top layer of the repair compound so that the surface can be easily reworked. You can use a latex glove by lightly wetting your index finger and using it to slightly smooth the repair area. Alternatively, the repair area can also be refinished with the sanding pad. Both methods are used to smooth a repair. Always work carefully and with little solvent. If you work too wet, the repair area will “blur.” In this way, you can recreate a repair until you are satisfied with the result.

Liquid leather repairs must finally be color-matched with the leather dye to compensate for differences in color and shine. In order to adequately cover the liquid leather, the leather dye should be applied several times and dried with a hairdryer in between. Then seal and care for the leather a day later

3. BMW leather color

Apply the BMW leather paint evenly to the affected areas from seam to seam using a sponge or spray gun and dry with a hairdryer. For small areas, applying to the affected area is sufficient. Only treat areas with color changes. If high coverage is required, apply the leather dye in several thin layers and dry with a hairdryer in between.

4. Leather sealing

Apply the leather sealant thinly with a soft cloth and allow to dry without polishing. One order is sufficient. Repeat every 3 months for stressed surfaces.