BMW leather dye/leather care set specially for BMW leather & Faux leather.
BMW leather dye is the ideal solution for concealing scuffs, fading, and minor scratches on leather or synthetic leather. This type of leather repair restores the original BMW leather color. Our BMW leather dye is characterized by its exceptional abrasion resistance in leather repairs. All our products are developed and manufactured in Germany. For over 20 years, the consistently high quality of our products has been our primary goal. Quality is trust, and trust is our hallmark. We earn this trust from our customers every single day.
Contents:
50ml Leather Degreaser 50ml BMW leather dye 50ml Leather Sealant 1 sanding pad 1 non-woven cloth 1 sponge As a general rule, the leather should be thoroughly degreased with leather degreaser before any color refreshing/dyeing. For scratches, scuffs, and slight fading, the original color of the leather can be restored with our BMW leather dye. After dyeing the leather, we recommend sealing it. The sealant protects against further wear and tear and is comparable to a clear coat as a protective layer.
Our leather dye restores the original color. It is opaque and abrasion-resistant.
We recommend using a spray gun for color changes.
Always test all products on a hidden area first to check for changes or color accuracy!
Application:
1. Leather degreaser
Lightly dampen a clean cloth with the leather degreaser and wipe the greasy areas. Especially with open-pore leathers (suede, aniline leather, etc.), only wipe the leather briefly with the cloth to avoid leaving marks or stains. Not all grease stains can be completely removed. After cleaning with leather degreaser, the leather must be re-protected with leather sealant.
2. BMW leather color
Apply the leather dye for BMW evenly to the affected areas from seam to seam using a sponge or spray gun, and dry with a hairdryer. For small areas, applying the dye only to the affected spot is sufficient. Treat only areas with discoloration. If high coverage is required, apply the leather dye in several thin coats, drying with a hairdryer between coats.
3. Leather sealing
Apply the leather sealant thinly with a soft cloth and allow it to dry without buffing. One application is sufficient. Repeat every 3 months for high-wear areas.
