30ml Porsche Leather Repair Set "S"

Porsche leather color/leather care set specially for Porsche leather & synthetic leather.

The Porsche leather color is the optimal solution for concealing abrasions, fading, and minor scratches on leather or synthetic leather. With this type of leather repair, the original Porsche leather color of the leather is restored. All our products are developed and manufactured in Germany. For over 20 years, the high and consistent quality of our products has been the goal of our work. Quality is trust, and trust is our trademark. We earn this trust from our customers every day.

Contents:

• 30ml Porsche Leather Color
• 10ml Liquid Leather colorless/neutral
• 1 Sanding Pad
• 1 Plastic Spatula
• 1 Sponge

In principle, the leather should be cleaned with our Leather Cleaner and degreased with Leather Degreaser before a color refresh. For scratches, abrasions, and slight fading, the original Porsche leather color of the leather is refreshed with our leather color. Deep scratches, cracks, or similar can be filled with our Liquid Leather. After coloring the leather with the leather color, we recommend sealing and caring for the leather. The seal protects against renewed wear and tear, and the care stops the decay of the leather and protects against fading.

Our leather color refreshes the original color. It is opaque and wear-resistant.

For recoloring, we recommend using a spray gun.

Always test all products first on a hidden area for changes or color accuracy!

Application:

1. Leather Sanding Pad

Smooth rough spots, hard and protruding edges, and dry cracks with the sanding pad. Remove sanding dust.

3. Liquid Leather

Open the tube and fill the damaged areas with the liquid leather. Distribute the liquid leather evenly with a spatula. Then let it dry for 1-2 hours, depending on the amount applied. Repeat the process until the repair area is as smooth and filled as possible.

For larger damages, it is sometimes not possible to achieve a smooth and even surface of the repair just by applying with a spatula.Such damage points must then be reworked. However, liquid leather cannot be dry sanded. This would damage the repair area.

In cases where smoothing of the repair area is necessary, this can be done with solvent, acetone, nail polish remover. The solvent dissolves the top layer of the repair compound, allowing the surface to be easily reworked. One can use a latex glove, slightly moistening the index finger and smoothing the repair area gently with it. Alternatively, the repair area can also be reworked with the sanding pad. Both methods serve to smooth a repair. Always work carefully and with little solvent. If it gets too wet, the repair area "blurs". In this way, one can continue to reshape a repair until satisfied with the result.

Liquid leather repairs must be color-adjusted with the leather dye last to compensate for color and gloss differences. To sufficiently cover the liquid leather, the leather dye should be applied multiple times and dried with a hairdryer in between. Then seal and care for the leather one day later & care

4. Porsche Leather Dye

Apply the Porsche leather dye evenly to the affected areas from seam to seam using a sponge or spray gun and dry with a hairdryer. For small areas, applying it to the affected spot is sufficient. Treat only areas with color changes. If high coverage is required, apply the tint in multiple layers and dry with a hairdryer in between.